| Model |
LMS-62P |
| Configuration |
2-way Full-Range, Bi-amp |
| High-frequency Transducer |
SK-70D HF Driver on SFG 10(Converging Lens) |
| Low-frequency Transducer |
SK65200FP, 6.5"(162mm) woofer x 4. |
| Frequency Response (± 3dB)¹ |
150Hz - 20kHz |
| Frequency Range (-10dB)¹ |
125Hz - 23kHz |
| Nominal Impedance |
LF : 16Ω/4Ω Selectable / HF : 16Ω Fixed |
| Continuous Power Capacity |
HF : 70W/280W PEAK |
| LF : 360W/1440WPEAK |
| Sensitivity (㏈ SPL, 1 W at 1 m) |
HF : 105dB |
| LF : 100dB |
| Recommended Power |
HF : 140W |
| LF : 720W |
Maximum Output,Continuous/Peak
(dB SPL at 1 m) |
HF: 123.47dB /129.47dB |
| LF: 125.58dB /131.58dB |
| Nominal Coverage |
H : 110º |
| V: Dependent on number of elements used |
| Enclosure Type |
Ported, trapezoidal |
| Enclosure Material |
2 x 12 mm birch plywood |
| Finish |
Available in black or White(Option), paintable |
| Grille |
Perforated, powder coated 16AWG steel, |
| Connectors For Amplifiers |
2× Neutrik Speakon in parallel |
| Pins : 1+/1- LF |
| Pins : 2+/2- HF |
| Controls for Select LF Impedance |
4 ohm/off/16 ohm by up down switch |
| Controls for Select HF Sound Level |
Normal/off/-3dB by up down switch |
| Attachment Points |
Integral, "I" plate adjustable rigging system, vertical |
| splay adjustable in 1º incremments from 0º - 10º |
| Dimensions |
|
| Weight (Net/Shipping) & Volume |
|
| Available Accessories |
B6015LMH: Array Frame/P62SB : Safety bar(full-back bar)/ |
| P62LMIFF, P62LMIRR : Fly Grid plate/L09LM: Locking Pin |
| B62LMU: ground-stacked "U" frame/ |
| SPM-35130 speaker pole |
