| Model  | 
						SP-K615AP | 
						
						
						| ENCLOSURE SPECIFICATION  | 
						  | 
						
						
						| System configuration | 
						Powered Subwoofer | 
						
						
						| Components & Loading | 
						One SK15600 15", Bass-reflex | 
						
						
						| Operating Mode | 
						Active powered | 
						
						
						  | Enclosure Material | 
						  Plywood, MDF. | 
						
						
						  | Enclosure Finish | 
						  Black warnex texture coated | 
						
						
						| Frequency Response | 
						  | 
						
						
						| ¡¾3 dB | 
						53Hz ~ 300Hz | 
						
						
						| -10 dB | 
						45Hz ~ 350Hz | 
						
						
						| Axial Sensitivity(dB SPL, 1 watt @ 1m) | 
						99 | 
						
						
						  | Recommended high pass frequency | 
						  50Hz | 
						
						
						| Nominal Input Impedance(ohms)  | 
						8 ohms | 
						
						
						| Power Handling(Watts, Continuius) | 
						500 | 
						
						
						| Power Handling(Watts, Peak) | 
						2000 | 
						
						
						| Calculated SPL Limit(Referenced to 1 m) | 
						  | 
						
						
						| Peak | 
						132dB | 
						
						
						| Long Term | 
						126dB | 
						
						
						| Optional Accessries | 
						STK Caster "SCP80"(80mm wheel),  "SCP 100"(100mm wheel) 
						  STK Pole "SPM35130"(35mm) | 
						
						
						Demensions 
						( ¡¾0.13 inch / ¡¾3 mm) | 
						Height 526 | 
						
						
						| Front width 475  | 
						
						
						  | Rear width 475 | 
						
						
						| Depth 595  | 
						
						
						  | Shipping/CBM | 
						  0.1951 | 
						
						
						| Net weight | 
						36 kg | 
						
						
						| Shipping weight | 
						40 kg | 
						
						
						| AMPLIFIER SPECIFICATION  | 
						  | 
						
						
						| Max output Power(class AB full bridge) | 
						  | 
						
						
						| EIA @1KHz 1% THD | 
						500W | 
						
						
						  | FTC @THD+N=0.1% | 
						  470W | 
						
						
						| Frequency Response(X-Over Filter off) | 
						10Hz ~ 30kHz | 
						
						
						  | Frequency Response(X-Over Filter on) | 
						  10Hz at -1dB to 250Hz at-3dB | 
						
						
						THD +N  20Hz ~ 30 kHz | 
						≤0.05% | 
						
						
						  | S/N Ratio (Filter: A-waiting.RMS) | 
						  ≥  91dB | 
						
						
						  | Input Sensitivity (Att max) | 
						  + 4dBu | 
						
						
						  | Crossover Frequency | 
						  Variable 60Hz to 250Hz 12dB/oct | 
						
						
						| Low cut Filter | 
						30Hz 12dB/Oct | 
						
						
						| Phase select | 
						1. 0 degree (switch out) 
						2. 180 degree (switch on) | 
						
						
						| Input impedance | 
						10k ohm(unbalance), 20k ohm (balance) | 
						
						
						  | Limeter threshold level | 
						  + 6dBu @ 100Hz | 
						
						
						  | Limiter control range | 
						  + 18dBu @ 100Hz | 
						
						
						  | Damping Factor | 
						  LF ≥350 | 
						
						
						  | Controls | 
						  LCF on/off, Phase shift, Amp gain knob, Frequency variable, AC switch. | 
						
						
						  | Connectors Input/Through | 
						  XLR Female jack/XLR Male jack | 
						
						
						  | Indicators  | 
						  Power(green), Sig(green), LF clip(red) | 
						
						
						  | Protection | 
						  1)short circuit, 2)current limiter, 3) DC detection, 
							4)Thermal cut off, 5) VDC cut off fuse. | 
						
						
						  | Fan operating | 
						  Low and high speed control  | 
						
						
						  | Power Requirements(1/3 power) | 
						  240 Watts | 
						
						
						  | Mains power | 
						  110/220/230/240 AC 50/60Hz |