Model |
LMS-62P |
Configuration (��ǰ����)
|
2-way Full-Range, Bi-amp |
High-frequency Transducer (�����뿪 ����Ʈ)
|
SK-70D HF Driver on SFG 10(Converging Lens) |
Low-frequency Transducer (�����뿪 ����Ʈ)
|
SK65200FP, 6.5"(162mm) woofer x 4. |
Frequency Response (± 3dB)¹ (���ļ� ���� Ư��)
|
150Hz - 20kHz |
Frequency Range (-10dB)¹ |
125Hz - 23kHz |
Nominal Impedance (���� ���Ǵ���)
|
LF : 16��/4�� Selectable / HF : 16�� Fixed |
Continuous Power Capacity (�Է� ����)
|
HF : 70W/280W PEAK |
LF : 360W/1440WPEAK |
Sensitivity (�� SPL, 1 W at 1 m) (���� ����)
|
HF : 105dB |
LF : 100dB |
Recommended Power (��� �Է�����)
|
HF : 140W |
LF : 720W |
Maximum Output,Continuous/Peak (dB SPL at 1 m) (�ִ�����,����/��ũ)
|
HF: 123.47dB /129.47dB |
LF: 125.58dB /131.58dB |
Nominal Coverage (���� ��簢)
|
H : 110º |
V: Dependent on number of elements used |
Enclosure Type (�ɺ�� ��������)
|
Ported, trapezoidal |
Enclosure Material (�ɺ�� ���)
|
2 x 12 mm birch plywood |
Finish (�ܰ� ����ó��)
|
Available in black or White(Option), paintable |
Grille (�����)
|
Perforated, powder coated 16AWG steel, |
Connectors For Amplifiers (���� ���Ӻ� ����)
|
2× Neutrik Speakon in parallel |
Pins : 1+/1- LF |
Pins : 2+/2- HF |
Controls for Select LF Impedance (�Է� ���Ǵ��� ����)
|
4 ohm/off/16 ohm by up down switch |
Controls for Select HF Sound Level (�����뿪 ���м���)
|
Normal/off/-3dB by up down switch |
Attachment Points (�������� ���)
|
Integral, "I" plate adjustable rigging system, vertical |
splay adjustable in 1º incremments from 0º - 10º |
Dimensions (�ܰ� ġ��)
|
|
Weight (Net/Shipping) & Volume (����,����)
|
|
Available Accessories (���� ������)
|
B6015LMH: Array Frame/P62SB : Safety bar(full-back bar)/ |
P62LMIFF, P62LMIRR : Fly Grid plate/L09LM: Locking Pin |
B62LMU: ground-stacked "U" frame/ |
SPM-35130 speaker pole |